High concentration formulation developability approaches and considerations.

The growing need for biologics to be administered subcutaneously and ocularly, coupled with certain indications requiring high doses, has resulted in an increase in drug substance (DS) and drug product (DP) protein concentrations. With this increase, more emphasis must be placed on identifying critical physico-chemical liabilities during drug development, including protein aggregation, precipitation, opalescence, particle formation, and high viscosity. Depending on the molecule, liabilities, and administration route, different formulation strategies can be used to overcome these challenges. However, due to the high material requirements, identifying optimal conditions can be slow, costly, and often prevent therapeutics from moving rapidly into the clinic/market. In order to accelerate and derisk development, new experimental and in-silico methods have emerged that can predict high concentration liabilities. Here, we review the challenges in developing high concentration formulations, the advances that have been made in establishing low mass and high-throughput predictive analytics, and advances in in-silico tools and algorithms aimed at identifying risks and understanding high concentration protein behavior.

The receptor subunit Tom20 is dynamically associated with the TOM complex in mitochondria of human cells.

The outer membrane translocase (TOM) is the import channel for nuclear-encoded mitochondrial proteins. The general import pore contains Tom40, Tom22, Tom5, Tom6, and Tom7. Precursor proteins are bound by the (peripheral) receptor proteins Tom20, Tom22, and Tom70 before being imported by the TOM complex. Here we investigated the association of the receptor Tom20 with the TOM complex. Tom20 was found in the TOM complex, but not in a smaller subcomplex. In addition, a subcomplex was found without Tom40 and Tom7 but with Tom20. Using single particle tracking of labeled Tom20 in overexpressing human cells, we show that Tom20 has, on average, higher lateral mobility in the membrane than Tom7/TOM. After ligation of Tom20 with the TOM complex by post-tranlational protein trans-splicing using the traceless, ultrafast cleaved Gp41-1 integrin system, a significant decrease in the mean diffusion coefficient of Tom20 was observed in the resulting Tom20-Tom7 fusion protein. Exposure of Tom20 to high substrate loading also resulted in reduced mobility. Taken together, our data show that the receptor subunit Tom20 interacts dynamically with the TOM core complex. We suggest that the TOM complex containing Tom20 is the active import pore and that Tom20 is associated when substrate is available.

In Cellulo Protein Semi-Synthesis from Endogenous and Exogenous Fragments Using the Ultra-Fast Split Gp41-1 Intein.

Protein semi-synthesis inside live cells from exogenous and endogenous parts offers unique possibilities for studying proteins in their native context. Split-intein-mediated protein trans-splicing is predestined for such endeavors and has seen some successes, but a much larger variety of established split inteins and associated protocols is urgently needed. We characterized the association and splicing parameters of the Gp41-1 split intein, which favorably revealed a nanomolar affinity between the intein fragments combined with the exceptionally fast splicing rate. Following bead-loading of a chemically modified intein fragment precursor into live mammalian cells, we fluorescently labeled target proteins on their N- and C-termini with short peptide tags, thus ensuring minimal perturbation of their structure and function. In combination with a nuclear-entrapment strategy to minimize cytosolic fluorescence background, we applied our technique for super-resolution imaging and single-particle tracking of the outer mitochondrial protein Tom20 in HeLa cells.

A mesophilic cysteine-less split intein for protein trans-splicing applications under oxidizing conditions.

Split intein-mediated protein trans-splicing has found extensive applications in chemical biology, protein chemistry, and biotechnology. However, an enduring limitation of all well-established split inteins has been the requirement to carry out the reaction in a reducing environment due to the presence of 1 or 2 catalytic cysteines that need to be in a reduced state for splicing to occur. The concomitant exposure of the fused proteins to reducing agents severely limits the scope of protein trans-splicing by excluding proteins sensitive to reducing conditions, such as those containing critical disulfide bonds. Here we report the discovery, characterization, and engineering of a completely cysteine-less split intein (CL intein) that is capable of efficient trans-splicing at ambient temperatures, without a denaturation step, and in the absence of reducing agents. We demonstrate its utility for the site-specific chemical modification of nanobodies and an antibody Fc fragment by N- and C-terminal trans-splicing with short peptide tags (CysTag) that consist of only a few amino acids and have been prelabeled on a single cysteine using classical cysteine bioconjugation. We also synthesized the short N-terminal fragment of the atypically split CL intein by solid-phase peptide synthesis. Furthermore, using the CL intein in combination with a nanobody-epitope pair as a high-affinity mediator, we showed chemical labeling of the extracellular domain of a cell surface receptor on living mammalian cells with a short CysTag containing a synthetic fluorophore. The CL intein thus greatly expands the scope of applications for protein trans-splicing.

Site-Specific Modulation of Charge Controls the Structure and Stimulus Responsiveness of Intrinsically Disordered Peptide Brushes.

Intrinsically disordered proteins (IDPs) are an important and emerging class of materials for tailoring biointerfaces. While the importance of chain charge and resultant electrostatic interactions in controlling conformational properties of IDPs is beginning to be explored through in silico approaches, there is a dearth of experimental studies motivated toward a systematic study of these effects. In an effort to explore this relationship, we measured the conformations of two peptides derived from the intrinsically disordered neurofilament (NF) side arm domain: one depicting the wild-type sequence with four lysine-serine-proline repeats (KSP peptide) and another in which the serine residues were replaced with aspartates (KDP peptide), a strategy sometimes used to mimic phosphorylation. Using a variety of biophysical measurements including a novel application of scanning angle interference microscopy, we demonstrate that the KDP peptide assumes comparatively more expanded conformations in solution and forms significantly thicker brushes when immobilized on planar surfaces at high densities. In both settings, the peptides respond to changes in ambient ionic strength, with each peptide showing distinct stimulus-responsive characteristics. While the KDP peptide undergoes compaction with increasing ionic strength as would be expected for a polyampholyte, the KSP peptide shows biphasic behavior, with an initial compaction followed by an expanded state at a higher ionic strength. Together these results support the notion that modulation of charge on IDPs can regulate conformational and interfacial properties.

Single Cell GFP-Trap Reveals Stoichiometry and Dynamics of Cytosolic Protein Complexes.

We developed in situ single cell pull-down (SiCPull) of GFP-tagged protein complexes based on micropatterned functionalized surface architectures. Cells cultured on these supports are lysed by mild detergents and protein complexes captured to the surface are probed in situ by total internal reflection fluorescence microscopy. Using SiCPull, we quantitatively mapped the lifetimes of various signal transducer and activator of transcription complexes by monitoring dissociation from the surface and defined their stoichiometry on the single molecule level.

Stimuli-sensitive intrinsically disordered protein brushes.

Grafting polymers onto surfaces at high density to yield polymer brush coatings is a widely employed strategy to reduce biofouling and interfacial friction. These brushes almost universally feature synthetic polymers, which are often heterogeneous and do not readily allow incorporation of chemical functionalities at precise sites along the constituent chains. To complement these synthetic systems, we introduce a biomimetic, recombinant intrinsically disordered protein that can assemble into an environment-sensitive brush. This macromolecule adopts an extended conformation and can be grafted to solid supports to form oriented protein brushes that swell and collapse dramatically with changes in solution pH and ionic strength. We illustrate the value of sequence specificity by using proteases with mutually orthogonal recognition sites to modulate brush height in situ to predictable values. This study demonstrates that stimuli-responsive brushes can be fabricated from proteins and introduces them as a new class of smart biomaterial building blocks.

Quantitative real-time imaging of protein-protein interactions by LSPR detection with micropatterned gold nanoparticles.

Localized surface plasmon resonance (LSPR) offers powerful means for sensitive label-free detection of protein-protein interactions in a highly multiplexed format. We have here established self-assembly and surface modification of plasmonic nanostructures on solid support suitable for quantitative protein-protein interaction analysis by spectroscopic and microscopic LSPR detection. These architectures were obtained by layer-by-layer assembly via electrostatic attraction. Gold nanoparticles (AuNP) were adsorbed on a biocompatible amine-terminated poly(ethylene glycol) (PEG) polymer brush and further functionalized by poly-l-lysine graft PEG (PLL-PEG) copolymers. Stable yet reversible protein immobilization was achieved via tris(nitrilotriacetic acid) groups incorporated into the PLL-PEG coating. Thus, site-specific immobilization of His-tagged proteins via complexed Ni(II) ions was achieved. Functional protein immobilization on the surface was confirmed by real-time detection of LSPR scattering by reflectance spectroscopy. Association and dissociation rate constants obtained for a reversible protein-protein interaction were in good agreement with the data obtained by other surface-sensitive detection techniques. For spatially resolved detection, AuNP were assembled into micropatterns by means of photolithographic uncaging of surface amines. LSPR imaging of reversible protein-protein interactions was possible in a conventional wide field microscope, yielding detection limits of ∼30 protein molecules within a diffraction-limited surface area.

A versatile toolbox for multiplexed protein micropatterning by laser lithography.

Photocleavable oligohistidine peptides (POHP) allow in situ spatial organization of multiple His-tagged proteins onto surfaces functionalized with tris(nitrilotriacetic acid) (tris-NTA). Here, a second generation of POHPs is presented with improved photoresponse and site-specific covalent coupling is introduced for generating stable protein assemblies. POHPs with different numbers of histidine residues and a photocleavable linker based on the 4,5-dimethoxy-o-nitrophenyl ethyl chromophore are prepared. These peptides show better photosensitivity than the previously used o-nitrophenyl ethyl derivative. Efficient and stable caging of tris-NTA-functionalized surfaces by POHPs comprising 12 histidine residues is demonstrated by multiparameter solid-phase detection techniques. Laser lithographic uncaging by photofragmentation of the POHPs is possible with substantially reduced photodamage as compared to previous approaches. Thus, in situ micropatterning of His-tagged proteins under physiological conditions is demonstrated for the first time. In combination with a short peptide tag for a site-specific enzymatic coupling reaction, covalent immobilization of multiple proteins into target micropatterns is possible under physiological conditions.

Modulating surface density of proteins via caged surfaces and controlled light exposure.

We demonstrate the possibility of tuning the degree of functionalization of a surface using photoactivatable chemistries and controlled light exposure. A photosensitive organosilane with a protected amine terminal group and a tetraethyleneglycol spacer was synthesized. A o-nitrobenzyl cage was used as the photoremovable group to cage the amine functionality. Surfaces with phototunable amine densities were generated by controlled irradiation of silica substrates modified with the photosensitive anchor. Protein layers with different densities could be obtained by successive coupling and assembly steps. Protein surface concentrations were quantified by reflectance interference. Our results demonstrate that the protein density correlates with the photogenerated ligand density. The density control was proved over four coupling steps (biotin, SAv, (BT)tris-NTA, MBP, or GFP), indicating that the interactions between underlying layer and soluble targets are highly specific and the immobilized targets at the four levels maintain their full functionality. Protein micropatterns with a gradient of protein density were also obtained.

Maleimide photolithography for single-molecule protein-protein interaction analysis in micropatterns.

Spatial organization of proteins into microscopic structures has important applications in fundamental and applied research. Preserving the function of proteins in such microstructures requires generic methods for site-specific capturing through affinity handles. Here, we present a versatile bottom-up surface micropatterning approach based on surface functionalization with maleimides, which selectively react with organic thiols. Upon UV irradiation through a photomask, the functionality of illuminated maleimide groups was efficiently destroyed. Remaining maleimides in nonilluminated regions were further reacted with different thiol-functionalized groups for site-specific protein immobilization under physiological conditions. Highly selective immobilization of His-tagged proteins into tris(nitrilotriacetic acid) functionalized microstructures with very high contrast was possible even by direct capturing of proteins from crude cell lysates. Moreover, we employed phosphopantetheinyl transfer from surface-immobilized coenzyme A to ybbR-tagged proteins in order to implement site-specific, covalent protein immobilization into microstructures. The functional integrity of the immobilized protein was confirmed by monitoring protein-protein interactions in real time. Moreover, we demonstrate quantitative single-molecule analysis of protein-protein interactions with proteins selectively captured into these high-contrast micropatterns.

Native laser lithography of His-tagged proteins by uncaging of multivalent chelators.

We report a generic approach for targeting proteins into micropatterns by in situ laser lithography. To this end, we have designed a photocleavable oligohistidine peptide for caging tris(nitrilo triacetic acid) (tris-NTA) groups on surfaces by multivalent interactions. Local photofragmentation of the peptide by UV illumination through a photomask or by a confocal laser beam uncages tris-NTA, thus generating free binding sites for rapid, site-specific capturing of His-tagged proteins into micropatterns. Iterative writing of proteins by laser lithography enabled for assembly of multiplexed functional protein microstructures on surfaces. Thus, versatile, user-defined protein micropatterns can be assembled under physiological conditions with a standard confocal laser-scanning microscope.

Functional immobilization and patterning of proteins by an enzymatic transfer reaction.

Functional immobilization and lateral organization of proteins into micro- and nanopatterns is an important prerequisite for miniaturizing bioanalytical and biotechnological devices. Here, we report an approach for efficient site-specific protein immobilization based on enzymatic phosphopantetheinyl transfer (PPT) from coenzyme A (CoA)-functionalized glass-type surfaces to specific peptide tags. We devised a bottom-up surface modification approach for coupling CoA densely to a molecular poly(ethylene glycol) polymer brush. Site-specific enzymatic immobilization of proteins fused to different target peptides for the PPTase Sfp was confirmed by real-time label-free detection. Quantitative protein-protein interaction experiments confirmed that significantly more than 50% of the immobilized protein was fully active. The method was successfully applied with different proteins. However, different immobilization efficiencies of PPT-based immobilization were observed for different peptide tags being fused to the N- and C-termini of proteins. On the basis of this immobilization method, we established photolithographic patterning of proteins into functional binary microstructures.

Affinity capturing for targeting proteins into micro and nanostructures.

Protein immobilization into micro and nanoscaled patterns opens exciting possibilities in fundamental and applied research. Developing efficient capturing techniques while preserving the structural and functional integrity of the proteins on surfaces is a key challenge for surface scientists. In this paper, current techniques for site-specific protein immobilization into engineered surface architectures are reviewed. Fundamental principles for functional protein immobilization on solid supports are discussed and popular affinity-based recognition pairs and their application for capturing proteins into nano and microstructures are presented.